Radio Alarm Clock Camera With USB

DAB clock radio with built in wireless camera and audio, this clock radio looks equally at home in a bedroom or living room making it perfect for covert filming anywhere around the office/home.

Once plugged in the built in camera transmits colour video and audio to a nearby receiver. Plug the receiver into any USB port on your computer and  the provided software can record straight onto your PC at 30 FPS and motion detection can be used for event only recording, it is also possible to view remotely via the internet though a knowledge of net working is needed to use this feature.The receiver also has a Av output allowing you to plug it into a TV or recorder. As no wires are required between camera and receiver this device lends it self to many use in a variety of situations
Windows 2000,Windows XP  Can be used with Vista but you will need to disable driver signing

 

2.4 GHz Mini. Transmitter W/Colour Camera                                                                                                                            
RF output power:           CE & BZT compliant                               
Operating power:            4.8-7.2V
Power consumption:       100mA                                                              
Antenna:                          Omni-directional antenna                          
Transmitting range          100 M (Line-Of-Sight)                             
Weight:                            11 grams

 

Colour Camera  Specs

1) Pixels: 365K (PAL), 250K (NTSC)

2) Resolution: Horizontal 380 TV Lines

3) Auto Electronic Exposure: 1/60 ?1/2000 sec.

4)  Automatic Exposure/Gain/White balance.

5) Mini. Illumination: <3 Lux f 1.2

6) Pin Hole Lens: 5.6mm! field angle: 60 degrees

 

Note  Best results are achieved where there is clear ?line of sight? between the mini camera transmitter and the receiver. Try to avoid obstacles such as trees, walls, cars, trucks and buildings. Transmitting over water and in the rain will reduce performance. Interference from certain electronic equipment or the moving human body can also effect the range obtainable.

For best reception position the antennas of the transmitter and receiver 4.5 to 6 feet (1.5 to 2m) above the ground. Please test all devices before final installation because the transmission quality can often be improved by moving the components slightly. Turn off the transmitter and receiver if the system is not in use. Do not touch the antennas when the system is switched on. Do not place the receiver behind a monitor