Originally developed for pubs & nightclubs, the camera's low light electronics have superb capabilities in low light situations whilst unlike most other cameras, it will still retain some colour information within the picture.
Great for identification in low light conditions!
A BUILT IN HEATER - Helps to prevent the lens frosting over on cold winter mornings, working down to an air temperature of -25°C.
ATTRACTIVE TAPERED DESIGN - In conjunction with the built-in heater this design helps prevent the build up of snow on the camera minimising chances of impaired vision.
A TOUGH RESIN FILLED INTERIOR -The sensitive electronics of the camera are completely encased in a polymer resin to provide the ultimate protection against water ingress and shock. Unlike some other cameras, condensation is not a problem with the Advanced-Vision camera.
A UV STABILISED LENS COVER - Toughened to help prevent scratches and UV stabilised to prevent the camera lens from becoming 'opaque' due to prolonged exposure to sunlight.
A ROLL OFF DRIP LIP- A cleverly engineered inner lens ring helps guide water around the lens rather than across it to maintain the optimum picture in heavy downpours.
A CLEVER BRACKET ARRANGEMENT - This allows excellent movement on both the horizontal and the vertical plane as well as facilitating wall and ceiling mounting.
* when fitted as per instructions.
Image Sensor 1/3" Colour
Resolution 540 TVL
Lens Type 3.6mm Board
Image Output 1 Volt Peak-Peak 75 ohm
Min. Illumination 0.0014 Lux (NiteDevil Mode)
Input Voltage 12V DC
Current Consumption 120mA
Dimensions 40x40x40mm. Length with bracket = 80mm
IP Rating IP67 Waterproof
Signal to Noise Ratio More Than 52dB
Gain Control Automatic
Video Connection Terminal Strip
Power Connection Terminal Strip
Finish Matt Black